So you got locked out of your safe? You’ve kept some items inside the safe which need to be accessed right now. But, after trying hours and hours, you’ve failed. So, you’ve come up with a solution. Yes, you’ve decided to drill the safe open.
Drilling the safe open is often the last thing you should do. Still, because of the intensely strong construction mechanism and utilizing highly durable materials, you don’t have many options left right now.
But, how do you open a safe with a drill?
Well, there are different methods and preventive measures to be followed, and here in our comprehensive guide, we’ll try to present you with some of those methods for a clearer understanding.
How Do You Open a Safe with a Drill
Don’t just run into the safe with a drill! There are many things that you must consider before something stupidly damaging happens.
Go through the different segments where we discuss the issue with avid details and required safety instructions.
How Do You Drill Into a Safe Lock
Drilling into a safe lock may not be as easy as it seems. Let’s look at the procedures you’d have to perform while drilling into a safe.
Drilling Into the Face
One of the most common ways to get the lock open is by drilling into the face of the locker. After a certain time, you’d reach the drive cam or the lever.
When you reach the part of the lever, you can utilize a punch rod to move them from the path or bend them to the point that they don’t block the way to the bolt.
Bypassing the Cobalt Mechanism
The cobalt mechanism present in the lock can come with exceptional difficulties in terms of getting it cracked.
Cobalt mechanisms can slow down the speed of drilling to a certain degree.
In case you’re using substandard grade drill bits, the chances are that the drilling may get stopped as well. Due to the durability-enhanced mechanism, it would be extremely difficult for any bits other than the titanium or diamond drill bit to get the job done.
So, if you want to go through the cobalt security system, you’d have to resort to these sophisticated methods. Despite your drill being armed with titanium or diamond bits, it may take several attempts to get it done cleanly.
Dilling and Angle
Another way to bypass the sturdy cobalt security is by drilling an angle just above the cobalt area and reaching the wheel pack directly.
A borescope can be used to view the interior locking mechanism, which would give you an easy way out.
Now, you can just line the notches up and get them opened from inside without much time or effort.
Safety Measures that You Should Maintain
Well, as you now know how it works, don’t just jump into it, as it may come with tonnes of serious safety issues. Here are some of the key issues you should be extremely careful about:
Protect Your Eyes
One of the biggest concerns while drilling is protecting your eyes. Because while drilling, the possibility of sharp metal pieces landing on your eye remains pretty high.
And the result of such incidents can prove to be catastrophic. So, always prioritize safeguarding your eyes before anything else. It’s best to wear safety goggles while drilling if you don’t want unexpected events to take place.
Don’t Put Too Much Pressure
Putting too much pressure while drilling isn’t a good practice either. It can cause serious physical injuries if you lose the grip and accidentally direct the course towards any of your body parts or someone else’s.
Always drill in a position where you don’t risk any of your body parts getting caught if you lose the grip while working.
Contact a Specialist
If you don’t want to call in a locksmith, get some experienced hands in for the job. Drilling into a safe isn’t the easiest thing to do. There are plenty of things you should keep in mind while doing so.
So, to minimize the possibilities of damage both to your own body and your safety, it’s better to call in someone with experience.
FAQs
How do you open a safe without a key?
Safes can be opened in tons of different ways if you’ve lost the keys. Paper clips can be used to open it, plus a screwdriver or knife can do the job. Finally, you can drill through it if it’s a bit stronger.
How do you open a safe without the combination?
Combination locks come with emergency keys with detailed instructions. Use them if you’ve forgotten the combination. Users can also contact the manufacturer’s support team for assistance.
What is the best drill tip to drill through the floor of a metal safe?
Using titanium and diamond drill bits can help you drill through the floor.
Why won’t my sentry safe open with the key?
If your key isn’t working with the sentry safe, you’re perhaps turning it in the opposite direction. Try turning it counterclockwise, and it’ll open without any issues.
How to Open a safe without damaging it?
If you want to open a safe without any damage to it. There are a few options that you can try. Calling in a locksmith should be the only way that you can get a safe opened without much damage.
Ask him to use the safest method to get the job done, even if it takes some time.
Final Thoughts
Getting locked out of a safe is one of the most irritating issues you can ever experience. Opening the safe becomes a serious struggle, and calling in a locksmith may not always seem like the most cost-effective solution either. What to do now, then?
We’d still suggest you try the easier methods, like using screwdrivers and paper clips. But if they don’t work at all, going ahead with the drilling is your last resort.
And to get the drilling done in the most efficient and protected manner, we have filled the guide with tons of clear details.
So, the question ‘how do you open a safe with a drill’ won’t bother you much, and you get to crack it open if it’s ever needed, right away!